Technical Parameters:
Controller Parameters
- Working Voltage: 5V~24V DC
- Data Type: SPI
- Working Current: 14mA~20mA
- IC Type: Single-wire RZ 5/6 Channels LED driver IC
- Working Temp: -10℃~40℃
- MAX Pixels: 360/300
- Dimension: 56mm*21mm*12mm (Not including the wires)
Remote Control Parameters：
- Working Voltage: 3V(CR2025)
- Static Current: 1uA
- Transport: 2.4G
- Remote Distance: 30M (Open space)
- Dimension: 103mm*45mm*8.5mm
Note:Restore Factory Settings Plug and unplug the power 5 times consecutively → Each power-on lasts approximately 1–2 seconds and must not exceed 5 seconds (exceeding 5 seconds resets the count) → Each power-off lasts at least 2 seconds → After 5 cycles, the white light flashes 3 times to indicate a successful reset.
Brief:
SP66AE SPI RGBCCT BT LED Controller that supports both App and 2.4G remote control. App features an intuitive visualized UI for real-time lighting effect preview and offers a wide variety of dynamic RGB effects and adjustable color temperature lighting. Combining vivid lighting and precise color temperature control, it provides an all-in-one solution for atmosphere creation and refined illumination.
Features:
- Supports two convenient control methods: App control and 2.4G RF remote control.
- All-new scene-based app UI design with support for scene switching, lighting effects can be previewed in real time for clear and intuitive visibility.
- Built-in rich dynamic and music effects for both RGB lighting and adjustablecolor temperature white light.
- Upgraded custom effects interface with more intuitive operation and support for effect saving.
- Supports personalized favorites, allowing users to create a custom lighting effect list with loop playback and timer settings.
- Supports customizable power-ON/OFF effects and startup state settings.
- Supports channel order calibration, device group management, timer ON/OFF, and auto-reconnect functions.
- Supports OTA updates, ensuring your device stays with the latest features and improvements.
Work With 2.4G Remote Control:
The 2.4G remote control model (RF4) compatible with SP66AE: Support one-to-many control, one remote control can control multiple controllers; Support many-to-one control, each controller can bind up to 5 remote controls.
Short press:Turn on the light Long press: Within 20s after thecontroller is powered on, long press ON to bind/unbind the remotecontrol.
·If the remote control is not bound for binding, the white light breathes 3 times;
·If the remote control has been bound for unbinding, white light breathing 1 time;
·If the number of bound remotes exceeds the maximum number(5), the binding is unsuccessful and the light willnot respond.
Short press: Turn off the light
Long press:Within 20s after the controller is powered on,first turn off the lights completely, and thenlong press the OFF button to clear all bound remote controls.
·Unbindall remote controls, and the white light will pulse 1 time.
Warning:
● Ensure the batteries are installed correctly according to polarity(+and-);
● Remove and immediately recycle or dispose of batteries from equipment notused for anextended period of time according to local regulations;
● Always completely secure the battery compartment. If the battery compartment does notclose securely, stop using the product, remove the batteries, and keep them away from children.
FCC Statement:
This device complies with part 15 of the FCC Rules.Operation is subject to thefollowing two conditions:(1)This device may not cause harmfu interference,and(2)this device must accept any interference received,including interferencethat may cause undesired operation.
Note:This equipment has been tested and found to comply with the limits for a Class-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circut different from that to which-Consult the dealer or an experienced radio/TV technician for help.B digital devicepursuant to part 15 of the FCC Rules.These limits are designedthe receiver is connected.to provide reasonable protection against harmful interferencein a residentialinstallation.This equipment generates,uses and can radiate radio frequencyenergy and,if not installed and used in accordance with the instructions,maycause harmful interference to radio communications.However,there is noguarantee that interference will not occur in a particular installation.If thisequipment does cause harmful interference to radio or television reception,whichcan be determined by turning the equipment off and on,the user is encouragedto try to correct the interference by one or more of the following measures:
Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.
This equipment complieswith FCC RF radiation exposurelimits set forth for anuncontrolled environment.
WEEE:(Correctly dispose of this product.This marking indicates that thsTo safely recycle your device,please use return and collection systems orproduct should not be disposed with other household wastescontact the retailer where the device was originally purchased.throughout the EU/UK.To prevent possible harm to the environmentor human health from uncontrolled waste disposal,recycleresponsibly to promote the sustainable reuse of material resources.