Technical Parameters:
Controller Parameters
- Working Voltage:5V~24V DC
- Working Current:12mA~25mA
- PWM Single Channel Maximun Output Current:2A
- Working Temp:-10℃~40°℃Dimension:55mm*26mm*12mm(not including the wires)
Brief:
SPl addressable RGB&2CH PWM LED controller,combine RGB LED driver IC anddual-way PWM,freely control RGB and CCT LED,with unique dynamic,music andDIY effects to meet your lighting and ambiance needs.
Features:
1.Support App control and2.4G remote control;
2.Support up to 600 single-wire RZ RGB LED driver ICs.
3.Built-in a varety of music and dynamic effects,support effect pause,multi-parameter adjustable;
4.Capture music through the phone microphone,player streamer and on-boardmicrophone;
5.Support effect collection;
6.support DIY effects.
7.With a variety of ON/OFF animation effects.
8.With sequential channel calibration and ON/OFF timer functions;
9.Support OTA firmware upgrade.
APP:
1.SP64CE supports App control for ioS and Android devices.
2.Apple devices require ioS 10.0 or higher,and Androiddevices require Android 4.4 or higher.
3.You can search “BanlanX”in App Store or Google Play tofind the APP,or scan the QR code to download and install
Operations
● Open the App,click the +icon in the top right corner of the home page to
add device;
● Click the
◎icon in the upper right corner of the App to enter the settingspage,where you can modify the device name,set the timings,set the on/offeffect,OTA firmware upgrade,etc.
Work With 2.4G Remote Control:
The 2.4G remote control models(RA4)matched with SP64CE are as follows:
● Support one-to-many contro,one remote control can control multiple controllers.
● Support many-to-one control,each controller can bind up to 5remote controls.
FCC Statement:
This device complies with part 15 of the FCC Rules.Operation is subject to thefollowing two conditions:(1)This device may not cause harmful interference,and(2)this device must accept any interference received,including interferencethat may cause undesired operation.
Note:This equipment has been tested and found to comply with the limits for a Class-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which-Consult the dealer or an experienced radio/TV technician for help.B digital devicepursuant to part 15 of the FCC Rules.These limits are designedthe receiver is connected.to provide reasonable protection against harmful interference in a residentialinstallation.This equipment generates,uses and can radiate radio frequencyenergy and,if not installed and used in accordance with the instructions,maycause harmful interference to radio communications.However,there is noguarantee that interference willnot occur in a particular installation.If thisequipment does cause harmful interference to radio or television reception,whichcan be determined by turning the equipment off and on,the user is encouragedto try to correct the interference by one or more of the following measures:
Changes or modifications not expressly approved by the paty responsible forcompliance could void the user’s authority to operate the equipment.
This equipment complies with FCC RF radiation exposure limits set forth for anuncontrolled environment.
WEEE:区Correctly dispose of this product.This marking indicates that thsTo safely recycle your device,please use return and collection systems orproduct should not be disposed with other household wastescontact the retailer where the device was originally purchased.throughout the EU/UK.To prevent possible harm to the environmentor human health from uncontrolled waste disposal,recycleresponsibly to promote the sustainable reuse of material resources.